JOY-IT DEBO BUTTON MTX - Developer boards — button matrix, 16 buttons
11.76 EUR
Consult the complete sheet with in-depth details, compare prices and identify the features of PRODUCTNAME, available at the cost of PRICE CURRENCY; falls into the CATEGORY NAME; the seller is SELLER NAME and the manufacturer is MANUFACTURER NAME.
Button panel with 16 buttons (4 x 4) for Raspberry Pi, Ardruino and other developer boards.
Specifications
• Button panel with 16 buttons (4 x 4)
• Linked to four rows in four columns
• Just eight I/O cables are therefore required
• For microcontrollers and single-board computers
EAN: 4250236813202
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Button panel with 16 buttons (4 x 4) for Raspberry Pi, Ardruino and other developer boards.
Specifications
• Button panel with 16 buttons (4 x 4)
• Linked to four rows in four columns
• Just eight I/O cables are therefore required
• For microcontrollers and single-board computers
EAN: 4250236813202
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Comparison of Similar Products
JOY-IT DEBO USB-PD 1 - Developer Boards - USB-PD Trigger Module, USB-C to Terminal Bloc
20.8 EUR
With this small module you can trigger USB-PD protocols and thus charge your laptop via a PD-capable USB-C power supply, for example. The output voltage is adjustable in 5 steps (5 V, 9 V, 12 V, 15 V and 20 V) via the button integrated on the module. The currently selected voltage can be read from the color of the RGB LED integrated on the module (red = 5 V / yellow = 9 V / green = 12 V / light blue = 15 V / dark blue = 20 V / purple = highest possible voltage). Due to its output interfaces, the module can be used flexibly and is easy to integrate.Technical details• input voltage up to 20 V / 100 W (via a PD-capable USB-C power supply unit)
• input interface: USB-C
• Output voltage: 5/9/12/15/20 V (adjustable via knob)
• Output current: max. 5 A
• output power: max. 100 W
• Output interface: screw terminal block
• dimensions (LxWxH): 31.5 x 15 x 14 mm
Note• USB-C power supply not included in delivery
JOY-IT DEBO USB-PD 2 - Developer Boards - USB-PD Trigger Module, USB-C to USB-A
20.8 EUR
With this small module you can trigger USB-PD protocols and thus charge your laptop via a PD-capable USB-C power supply, for example. The output voltage is adjustable in 5 steps (5 V, 9 V, 12 V, 15 V and 20 V) via the button integrated on the module. The currently selected voltage can be read from the color of the RGB LED integrated on the module (red = 5 V / yellow = 9 V / green = 12 V / light blue = 15 V / dark blue = 20 V / purple = highest possible voltage). Due to its output interfaces, the module can be used flexibly and is easy to integrate.Technical details• input voltage up to 20 V / 100 W (via a PD-capable USB-C power supply unit)
• input interface: USB-C
• Output voltage: 5/9/12/15/20 V (adjustable via knob)
• Output current: max. 5 A
• output power: max. 100 W
• Output interface: USB-A
• Dimensions (LxWxH): 31.5 x 15 x 14 mm
Note• USB-C power supply not included in delivery
JOY-IT DEBO LCD 20X4 - Developer Boards - Display LCD 20x4, HD44780
17.81 EUR
20x4 LCD module with 16 pin headerThis 20x4 character LCD is best suited for your project.
It works with the common HD44780 controller chip and has a green backlight.
It has a 16 pin connector and can be used as a built-in or plug-on display. For this purpose, a corresponding solderable pin header is included in the scope of delivery.
Specifications
• Display size: 20 characters x 4 lines
• supply voltage: 4.7 - 5.3 V
• logic level: 5 V
• LCD controller: HD44780
• backlight: 5V DC LED backlight
• green backlight
• 16-pin pin header
• dimensions (LxWxH): 98,3 x 60 x 14 mm
Scope of delivery
• 20x4 LCD module
• 16 pin male header
JOY-IT DEBO POE ADAPT 2 - Developer Boards - POE USB-C Power Adapter
19.36 EUR
"With this adapter you can power your Raspberry Pi and other single board computers, which are powered by a USB-C port, via POE LAN.The adapter is connected directly to a POE-capable router/switch or POE injector with a POE LAN cable (up to 100 meters cable length).
This allows you to use the Raspberry very flexibly and no power outlet and power supply is required.
- Connections: 1x USB-C plug, 1x RJ45 jack, 1 x RJ45 plug
- Input voltage: 36 - 57 V (standard PoE voltage 48 V, 52 V)
- Output voltage: DC 5 V
- Output current: 2 A
- Transmission distance: 10 - 100 m
- PoE Protocol: IEEE802.3af
- Network bandwidth: 10/100 Mbps
- Operating temperature: -50 to +75°C
- Dimensions: 82 x 28 x 23 mm
JOY-IT DEBO RB-BB 3B - Developer boards - Laboratory card, 84 x 54 mm, black
12.48 EUR
Lab card from Joy-it for the developer board areaWelcome to the world of electronic prototypes, where innovation and reliability meet! Our high-quality breadboard is the ideal tool for all your electronics projects.
Whether you are an experienced electronics expert or a beginner, our breadboard is designed to optimize your prototyping experience.
With precise plug-in holes and universal compatibility, it allows you to connect electronic components securely and effortlessly. This allows you to implement your ideas quickly and reliably.
Specifications
• 1 contact terminal with 300 contacts
• 2 distribution terminals with 100 contacts
• Material: plastic
• Color: black
• Adhesive surface on the underside
• Dimensions (LxWxH): 84 x 54 x10 mm
JOY-IT DEBO SD-NAND 512 - Developer boards - 512 MB SD-NAND flash memory
23.28 EUR
This flash memory module allows you to store and read data externally via the SPI interface of your microcontroller.The module is controlled exactly like a conventional SD card and is therefore particularly simple. The module can be operated with 3.3 V as well as 5 V thanks to the integrated voltage converter.
Specifications• Operating voltage: 3 ... 5 V
• logic level: VCC
• Interface: SPI
• memory size: 512 MB
• clock frequency: up to 50 MHz
FREI DEBO LCD 16X2 BL - Developer boards - Display, 16 x 2 characters, blue
15.63 EUR
This display can be used for all common developer boards, such as Raspberry Pi or Arduino.Specifications
• 16 x 2 characters (2 rows with 16 columns)
• HD44780 industry standard
• with soldered-on I2C communication adapter
• therefore only 4 I/O lines (power supply + 2x data lines) are required for operation
• both 3.3V and 5V logic level (@power supply 5V)
• 16 x 2 characters (2 lines with 16 columns)
• backlight: color blue
JOY-IT DEBO UART2RS232 - Developer boards - UART-RS232 transceiver, incl. pin header
13.36 EUR
"The COM-TTL-RS232 transceiver is the ideal solution to enable seamless communication between UART interfaces and RS232 serial ports. This compact module is designed for reliable and bidirectional data transmission and is ideal for use in industrial, communication and control applications.
Main features
- Bidirectional signal conversion: Easily converts data signals between UART and RS232, enabling interaction between modern microcontrollers and legacy devices.
- Easy integration: Compact design and included pin header make it easy to use in your projects.
- Reliability through SP3232E chipset: High stability and efficiency for your applications.
- Flexible use: Supports logic levels from 3 V to 5.5 V and supply voltages of 3 V / 5 V.
Technical data
- Chipset: SP3232E
- Supply voltage: 3 V - 5 V
- Logic level: 3 V / 5 V
- Communication direction: Bidirectional
- Dimensions: 43 x 15 x 3 mm
- Weight: Only 3 g
Scope of delivery
- 1x UART - RS232 transceiver module (COM-TTL-RS232)
- 1x pin header (not soldered)
JOY-IT DEBO SEN-KY033LT - Developer boards - Line Tracker
12.17 EUR
This sensor transmits and receives infrared. It can detect whether it has a reflective surface (the sensor receives its own signal) or an absorbent surface (the sensor does not receive a signal) in front of it. The sensitivity of the sensor can be adjusted using a potentiometer.
Robots, for example, can use three of these sensors to perform an automated line tracker function.
Technical specifications
• Function: Detects a line using infrared (0/1 signal output) / With three of these sensors, robots can automatically follow a line
• Detection range: 1 - 25 mm
• Supply voltage: 3 - 5 V
• Power consumption: 3 V approx. 7 mA / 5 V approx. 13 mA
• Operating temperature: 0 °C to 50 °C
• Dimensions: 42 x 11 x 8 mm
JOY-IT "DEBO LCD 7 HDMI - Developer boards - Display LCD-Touch, 7"", HDMI, GT811"
58.74 EUR
The 7 inch (17.78 cm) TFT display expands the Raspberry Pi or Banana Pi with a touchscreen display in no time at all. It can also be used on any Windows device and convinces with its high contrast and colour-fast display. With a maximum resolution of 1024x600 pixels, this display is suitable for any application.Technical data- Resolution: 1024 x 600
- supported devices: Raspberry Pi, Banana Pi, Banana Pro, Windows PCs
- Connections: HDMI, Micro-USB
- Touch Controller: GT811
- Touch Panel Type: Capacitive (5 Multi-Touch)
- Backlight: LED
- Display size: 154.21 x 85.92 (mm)
Special functions- Can also be used as a standalone HDMI display
reference
- suitable housing see accessories
JOY-IT DEBO RB-BB 2B - Developer boards - Laboratory card, 165 x 54 mm, black
12.64 EUR
Lab card from Joy-it for the developer board areaWelcome to the world of electronic prototypes, where innovation and reliability meet! Our high-quality breadboard is the ideal tool for all your electronics projects.
Whether you are an experienced electronics expert or a beginner, our breadboard is designed to optimize your prototyping experience.
With precise plug-in holes and universal compatibility, it allows you to connect electronic components securely and effortlessly. This allows you to implement your ideas quickly and reliably.
Specifications
• 1 contact terminal with 630 contacts
• 2 distribution terminals with 200 contacts
• Material: plastic
• Color: black
• Adhesive surface on the underside
• Dimensions (LxWxH): 165 x 54 x10 mm
JOY-IT DEBO BUTT MTX2 2 - Developer boards - Button matrix, 16 buttons
12.33 EUR
Compact 4x4 keypad for precise inputs The ButtonMatrix2 from Joy-IT offers 16 tactile buttons in a robust design, ideal for microcontroller projects and embedded applications.
Thanks to the row and column-based scanning, all buttons can be reliably queried with just eight GPIOs.
Features
- Compact keypad with 16 buttons (4x4 matrix)
- Tactile switches for precise feedback
- Direct connection to microcontroller possible
- Simple query via only 8 GPIO pins
- Robust design for long-lasting use
- Compact dimensions: only 55 x 40 x 7 mm
Technical specifications
- Number of buttons: 16 (4 rows x 4 columns)
- Rated voltage: 0 - 12 V DC
- Rated current: 0 - 50 mA
- Connection: 2.54 mm pin header, 90°
- Dimensions: 55 x 40 x 7 mm
- Weight: 11 g
Scope of delivery
- 1x ButtonMatrix2 keypad
JOY-IT DEBO DCDC 20W - Developer boards - Voltage regulator 20 W, DC/DC converter, XL60
14.07 EUR
"XL6019 Converter module with voltage regulator (step-up)Powerful DC/DC converter with adjustable voltage regulator (XL6019). Ideal for simple and universal voltage adjustment.
- Input voltage: 5 ... 35 V
- Output voltage: 5 ... 40 V
- steplessly adjustable
- max. output current: 1.5 A
- max. output power: 20 W
- efficiency: up to 94
- built-in thermal overload shutdown
- built-in soft-start function
FREI DEBO TOUCH 16CH - Developer Boards - Touch Pad, 16 Keys, capacitive, TTP229
12.22 EUR
The semiconductor-based touch pad is the durable alternative to classic keyboards with switches. Thanks to the capacitive measurement, the pad is also suitable for dusty or rough environments. The internal calibration detects changes in the environment and automatically adjusts the sensitivity.Technical data• Chipset: TTP229
• Supply voltage: 2.4 - 5.5 V DC
• standby consumption from 2 µA
• serial interface
• selectable sampling rate
• automatic calibration
• dimensions:65 x 50 mm
JOY-IT DEBO LCD16X2 BL - Developer boards - display, 16 x 2 characters, blue
14.76 EUR
"This 16 character / 2 line display is equipped with a 16 pin header.It can be easily applied to your own projects. It is compatible with breadboards and is therefore also ideally suited for experimental setups as well as with the EXP500 experimental board.
Specifications• Display size: 16 characters x 2 lines
• backlight: +5 V DC LED backlight
• connection option: 16-pin header
• dimensions (LxWxH): 80 x 36.5 x 11 mm
Scope of delivery
• 16x2 LCD module
• header
NoteFor instructions and code examples see ""Data sheets""."
JOY-IT "DEBO LCD 10 HDMI - Development boards - LCD 10"" touchscreen display, HDMI"
171.14 EUR
"LCD touch display 10"" for developer boardsThe new 10"" touch display with metal housing from Joy-IT is a robust all-rounder and suitable for a wide range of applications. It is characterized by its robust workmanship. The matt black metal housing complements perfectly with the hard coating of the display (H3). Due to the integrated stereo speakers and the included remote control, the display is also ideal for multimedia use or presentations in sales rooms.
The display also works with conventional PC systems via the HDMI and VGA connection.
Small highlights are the BNC and AV connections, which are also available for connecting camera systems.
Tinker in your workshop on your new open source project with the support of Raspberry and Co. and at the same time have the possibility to perform finest soldering work with a camera microscope and work with millimeter accuracy.
Equipment features:
- 10.1"" IPS Touch Display
- 1280 x 800 pixels
- Contrast 800:1
- incl. SBC holder and stand
- 1x HDMI, 1x VGA, 1x AV, 1x BNC,2x USB
- 12 V, 2000 mA
- brightness: 350 cd/m2, 16.7 million colours
- L x W x D (mm): 244 x 163 x 32
- Weight: 1,2 kg
- Metal housing, glare protection, hard coating (H3)
- Integrated stereo speakers (power 2 watts)
- incl. remote control
The scope of delivery includes an adapter board with which you can attach all common single-board computers directly to the monitor. Due to the additional USB connection you do not need a separate power supply for the operation with the SBC."
SOLDERED DEBO LCD 16X2 B2 - Developer boards - Display with easyC, 16 x 2 Z., blue
24.37 EUR
"An LCD display with HD44780 controller enables the display of text, symbols, values or other information from an Arduino (or a compatible board such as Dasduino). It can display 16 symbols in two lines and is therefore suitable for many projects that require clearly visible and readable output information. An I2C LCD adapter is soldered to this LCD screen, which makes it possible to display characters on the LCD screen via the I2C bus. It also features an easyC connector plug for a straightforward connection.Technical data
- max. voltage: 3.3 V
- Communication protocol: I2C
- with soldered I2C adapter
- with easyC connection
- Display dimensions: 64.5 x 16 mm
- Dimensions: 80 x 36 x 12 mm
easyC
easyC is a robust connection system that optimizes the connection of microcontrollers, sensors and actuators using JST-SH compatible connectors (JST 4-pin). It offers solderless connections, serial connections of multiple devices (daisy-chaining), error-free design, parallel connection, universal compatibility and intermediate compatibility with Qwiic (Sparkfun connection system), simplifying prototype development. Further information on easyC can be found under ""Data sheets"".
external links
https://github.com/SolderedElectronics/Soldered-16x2-LCD-Arduino-Library"
JOY-IT DEBO USB-PD 3 - Developer boards - USB-PD trigger module, USB-C to solder pads
21.53 EUR
With this small module you can trigger USB-PD protocols and thus charge your laptop via a PD-capable USB-C power supply, for example. The output voltage is adjustable in 5 steps (5 V, 9 V, 12 V, 15 V and 20 V) via the button integrated on the module. The currently selected voltage can be read from the color of the RGB LED integrated on the module (red = 5 V / yellow = 9 V / green = 12 V / light blue = 15 V / dark blue = 20 V / purple = highest possible voltage). Due to its output interfaces, the module can be used flexibly and is easy to integrate.Technical details• input voltage up to 20 V / 100 W (via a PD-capable USB-C power supply unit)
• input interface: USB-C
• Output voltage: 5/9/12/15/20 V (adjustable via knob)
• Output current: max. 5 A
• output power: max. 100 W
• Output interface: solder pads (for USB-A or screw terminal)
• dimensions (LxWxH): 31.5 x 15 x 14 mm
Note• USB-C power supply not included in delivery
JOY-IT DEBO USB-PD 4 - Developer boards - USB-PD trigger module, solder pads
16.14 EUR
With this small module, you can trigger USB PowerDelivery protocols and thus charge your laptop via a PD-capable USB-C power supply, for example. The output voltage is adjustable in 5 steps (5 V, 9 V, 12 V, 15 V and 20 V) via the button integrated on the module as well as via the trigger input. The currently selected voltage can be read from the color of the RGB LED integrated on the module. The module is flexible to use and easy to integrate due to its interfaces and design.Specifications• Output voltage: 5 ... 20 V
• supply voltage: up to 20 V / 100 W
• output current: max. 5 A
• output power: max. 100 W
• input interface: solder pads
• output interface: solder pads
NotePower supply not included
JOY-IT DEBO RFID SET - Developer boards - RFID set with RC522 RFID module
24.37 EUR
RFID is a wireless identification system with which you can set up access controls for doors or store automatisms upon recognition for your smarthome. The manual describes how to connect the RC522 module to any Arduino or Raspberry Pi. The integrated MFRC-522 from NXP communicates with your developer board via the SPI interface and offers RFID according to the Mifare protocol in the 13.56 MHz (High Frequency) range.
In industry, RFID is often used for object tracking and positioning in logistics.
Technical Data
• chipset: MFRC-522
• Frequency: 13.56 MHz
• Protocol: Mifare
• interface: SPI
• compatible with Raspberry Pi 5B, 4B, 3B+ ... and Arduino
Scope of delivery
• RC522 RFID module
• 5x RFID cards
• 5x RFID clips
JOY-IT DEBO MOUNT-SET 2 - Developer boards - Breadboard toolkit incl. power module
31.97 EUR
"Breadboard toolkit incl. power module - perfect basis for your electronics projectsThe breadboard toolkit is the ideal solution for beginners and professionals to carry out test setups and electronic experiments with microcontrollers such as Arduino, Raspberry Pi, BBC micro:bit and many more.
This comprehensive set offers everything you need for a successful start in electronics - safely assembled and efficiently operated.
Features at a glance
• Flexible breadboard - With 830 pins, 200 of which are specifically for the power supply, the breadboard offers enough space for your circuits
• Adjustable power module - Supplies your circuits with 3.3 V and 5 V, individually adjustable for each side. In addition, 3.3 V, 5 V and ground are available on separate pins
• High current output - Maximum output power of 700 mA for reliable operation
• Versatile power supply - Can be connected via micro USB, standard USB or DC-IN. The USB ports can also be used to draw power when using DC-IN
• Practical mounting bracket - With various holes to securely attach microcontrollers. Mounting screws are already included in the set
• Complete accessories - Various jumper cables (including adapter for configuration as ""male"") and a high-quality mounting plate round off the set
Simple operation
The power module is simply plugged onto the breadboard and supplies it reliably with power. A switch allows you to conveniently choose between USB and DC-IN power sources, ensuring maximum flexibility.
Scope of delivery
• robust carrying case
• breadboard with 830 pins
• adjustable power module
• jumper cable
• mounting plate
• mounting screws"
JOY-IT DEBO SENS BME680 - Developer boards - Sensor Bosch BME680
28.35 EUR
The BME680 from Bosch Sensortec is the new, compact ambient sensor with integrated sensors for humidity, pressure, temperature and air quality. The I2C and SPI digital interfaces also enable simple and fast readout of theMeasured values.
Technical data- digital interfaces: I2C, SPI
- Operating voltage: 3 ... 5 V
- compatible with Arduino, Raspberry Pi, etc.
- Dimensions: 30 x 14 x 10 mm
humidity sensor- Reaction time: 8 s
- Tolerance: ± 3%.
- Hysteresis: 1.5%.
pressure sensor
- Pressure range: 300 ... 1100 hPa
- relative accuracy: ± 0.12 hPa
- absolute accuracy: ± 1 hPa
temperature sensor
- Working range: -40 ... +85 °C
- complete accuracy: 0 ... 65 °C
air quality sensor
- Reaction speed: 1 s
JOY-IT DEBO MOTODRIVER2 - Developer boards - MotoDriver2, L298N
17.17 EUR
The MotoDriver2 is an extension board which can be easily and quickly connected to your Arduino and allows you to control and to supply up to two DC-motors. Additional power supplys for your motors, or large amounts of cables, are no longer needed. The board allows to control with a constant voltage between 5V and 35V.Specifications
• Driver: L298N
• Logical voltage: 5V
• Drive Voltage: 5V— 35V
• Drive Current: 2A
• Power: Max. 25W
Dimensions (L x B x H): 43 x 43 x 27 mm
JOY-IT DEBO RELAY 4WAY - Developer boards - 4-way solid state relay, 5V, 240V/2A
20.18 EUR
This 4-channel solid state relay is suitable for switching AC voltage. It has a galvanic separation by integrated optocouplers and the switching of the load is done with transistors, which is why it has a much higher life span than mechanical relays.- Relay type Omron SSR
- compatible with Raspberry Pi, Arduino, etc.
- galvanic isolation, transistor switched, with fuse resistor (240 V, 2A)
- 5 V DC Supply voltage
- 240 V AC maximum load voltage
- 2 A maximum load current
- 0 - 2.5 V: relay off
- 3.3 - 5 V: Relay On
- 0 mA Quiescent current
- 12,5 mA Operating current
- 2 mA Tripping current
- Dimensions (LxVxH): 57 x 55 x 23 mm
JOY-IT DEBO RELAY2 5V - Developer boards - Relay module, 5 V, SRD-05VDC-SL-C
14.6 EUR
"Product description: 5V relay module (COM-RM01)The COM-RM01 5V relay module is a reliable and powerful solution for switching high loads in various applications. It is ideal for industrial control, home automation and DIY projects. With a switching capacity of up to 6 A at 230 V AC or 30 V DC, it can be used for a wide range of applications. With additional cooling, it can even switch 10 A. Thanks to its compact design and simple control via 5 V logic signals, the relay can be easily integrated into existing systems.
Technical data
- Model: COM-RM01
- Function: Relay for switching higher voltages with 5V logic control
- Operating voltage: 5 V DC
- Control connections: VCC, GND, signal
- Load connections: COM, NO, NC
- Maximum load: 6 A / 230 V AC, 6 A / 30 V DC
- Maximum load with cooling: 10 A / 230 V AC, 10 A / 30 V DC
- Dimensions: 27 x 45 x 19 mm
The COM-RM01 is a compact and reliable solution for a wide range of switching applications - ideal for home automation, industrial control systems and DIY projects."
JOY-IT DEBO GAS MQ8 - Developer boards - gas sensor, hydrogen, MQ-8
14.86 EUR
This analogue gas sensor has a small heating element with an electronic-chemical sensor. It is suitable for indoor use and can only output accurate readings after the warm-up phase is complete.Features• compatible with Arduino
• compatible with Raspberry Pi only in combination with part no. RPI ADC (see accessories)
• 100 - 1000 ppm measuring range
• high sensitivity (adjustable via potentiometer)
• fast response time
• evaluation of measured values from microcontroller (analog)
• threshold setting possible (digital)
• 24 V loop voltage
• 5 V heating voltage
• 29 Ohm heating resistor at room temperature
• <900 mW Heizleistung
• -10 - +50 °C Betriebstemperatur
measurable substances
• hydrogen (H2)
• various gases containing hydrogen
Connections
• VCC: power supply 5V
• GND: Ground connection
• AOUT: Analog Output
• DOUT: Digital Output
Dimensions
• L x W x H: 52 x 20 x 18 mm
NoteAttention: The sensor gets warm during operation!
JOY-IT DEBO LEV SHIFTER - Developer Boards - Voltage Converter / Level Shifter, TXB0104
13.88 EUR
"Voltage translator/level shifter for various developer boardsThis board converts digital signals up or down from one voltage to another.
The module can be firmly soldered or used on a breadboard.
- Available channels: 4
- Voltage range (VCCa): 1.2 to 3.6 V
- Voltage range (VCCb): 1.7 to 5.5 V
- Dimensions: 27 x 17 x 11 mm
JOY-IT DEBO DVA 16BIT - Developer boards - Current monitoring board,
18.12 EUR
The product is a 16-bit module for monitoring the electrical current with an I2C interface, which is suitable for various digital bus voltages such as 1.8 V, 3.3 V and 5.0 V. It measures the voltage using an external resistor and provides information about the current flow, the bus voltage and the power. The values can be read out directly in amperes for the current and in watts for the power.The device monitors the bus voltage at the IN pin and can trigger an alarm in the event of over- or undercurrent as well as over- or undervoltage, which is visually signaled by a red LED. In addition, the module detects current flows at bus voltages in the range from 0 V to 48 V, regardless of the operating voltage.
Technical data
• Supply voltage: 1.7 - 5.5 V DC
• Measuring range: 0 - 20 A
• Logic level: 1.7 - 5.5 V
• Common mode voltage range: 0 - 48 V
• Communication interface: I2C, standard address 0x40, selectable via jumper: 0x40, 0x41, 0x42, 0x43
• green power LED, red alarm LED
• compatible with Raspberry Pi, Raspberry Pi Pico, Arduino, micro:bit and others
ADAFRUIT DEBO SHD MOTOR - Developer Boards Shield - Servo, 16 Channel, 12 Bit, PCA9685
32.69 EUR
"PWM driver Shield with integrated clock- 6 address selection pins
- adjustable frequency PWM up to approx. 1.6 kHz
- 12 bit resolution for each output
- configurable push-pull or open-drain output
- Dimensions: 54 x 70 x 3 mm
JOY-IT DEBO DAC MCP4725 - Developer Boards - DAC Converter, MCP4725
15.11 EUR
With this digital to analog converter, you can generate an analog voltage using a digital I2C signal. The I2C address can be changed from 0x60 to 0x61 by changing a solder bridge.The DAC has an integrated EEPROM memory, which makes it possible to output the desired voltage directly at startup.
Specification
• integrated EEPROM (14 bit)
• supply voltage: 2,7 ... 5,5 V
• logic level: VCC
• resolution: 12 bit
• interface: I2C
ADAFRUIT DEBO BO SMD16 - Developer boards (3 pieces) - SMD breakout circuit board
15.43 EUR
SMD board for SOIC-16 and TSSOP-16 devices SMD board for SOIC-16 and TSSOP-16 devicesSolder your chip to either side and you can get started with any experiment system.
WAVESHARE DEBO IO BOARD - Developer boards - I/O expansion board, MCP23017
21.84 EUR
The MCP23017 IO Expansion Board extends 2 signal pins to 16 I/O pins based on the I2C bus. Up to 8 expansion boards can be used simultaneously.- I2C controlled, extends 2 signal pins as 16 I/O pins
- I2C address configurable by short-circuiting the A0/A1/A2 bridges
- offers two connection options: PH2.0 Terminal and/or solder pads
- integrated voltage converter, compatible with 3.3 V / 5 V level
- Supplied with development resources and manual
Technical data- Operating voltage: 5 V / 3.3 V
- interface: I2C
- Interrupt pins: INTA, INTB, INTB
- Expansion I/Os: 16
- Mounting hole size: 2.0 mm
- Dimensions: 38 × 23 mm
Documentation and downloads can be found here:
www.waveshare.com/wiki/MCP23017_IO_Expansion_Board
JOY-IT DEBO GAS MQ135 - Developer boards - Gas sensor, benzene/fume, MQ-135
14.55 EUR
This analogue gas sensor has a small heating element with an electronic-chemical sensor. It is suitable for use in buildings and can only provide accurate readings once the warm-up phase is complete.measurable substances
- Benzene (C6H6)
- Ammonia (NH3)
- Sulphide
- Smoke
- other air contaminants
- compatible with Arduino
- compatible with Raspberry Pi only in combination with art. no. RPI ADC (see accessories)
- 10 - 1000 ppm Measuring range
- high sensitivity
- Detection of a wide range of concentrations
- Evaluation of the measured values from the microcontroller (analog)
- Threshold value setting possible (digital)
- 24 V DC Loop voltage
- 5 V DC Heating voltage
- 31 Ohm (+/- 3 Ohm) at room temperature
- 900 mW Heat output
- • -10 ... +50 °C Operating temperature
Connections
- VCC: Power supply 5V
- GND: Ground connection
- AOUT: Analog output
- DOUT: Digital output
Dimensions
- L x W x H: 52 x 20 x 18 mm
NoteAttention: The sensor gets warm during operation!
JOY-IT DEBO SPEED SENS - Developer Boards - Speed Sensor LM393
12.12 EUR
"This universal speed sensor is suitable for all common developer boards and integrates easily into your project. The mounting hole on the board ensures a secure and individual mounting.Technical data
- Operating voltage: 3.3 ... 5 V
- Singnal output: digital/analog
- Output status display
- slot width: 5 mm
- Dimensions: 32 x 14 mm
JOY-IT "DEBO LCD 1.28 - Developer boards - Display LCD, 1.28"", round, 240 x 240 pixels"
21.94 EUR
"The 1.28"" (3.18 cm) LCD display convinces with its high-resolution IPS display and its circular display surface.With a color depth of 65,000 colors, the display is particularly high-quality. Due to the control via the SPI interface, the display is ideally suited for use as an output device on microcontrollers and single board computers.
Specifications• Interface: 4-Wire SPI
• display size: 1.28"" - Ø 32.4 mm
• operating voltage: 3.3 V / 5 V
• resolution: 240 x 240 pixel
• LCD type: IPS LCD
• Display Controller: GC9A01
• color depth: 65,000
• Module dimensions (LxWxH): 40 x 37 x 10 mm"
FREI DEBO RELAIS 16CH - Developer boards - relay module, 16-channel, 12 V
28.14 EUR
"With this 16-channel relay module, large loads can be easily controlled/switched with 5 V from a microcontroller, e.g. Raspberry Pi, Arduino.... can be controlled / switched. All connections are accessible via screw terminals and can therefore be easily connected to a Raspberry Pi or other board using Dupont cables, for example. The definable switching level can be used to switch with either a high or a low level.Features
- 12 V interface card with 16 relays
- Driver current only 15 - 20 mA
- Switching capacity 250 V AC / 10 A or 30 V DC / 10 A
- Standard interface
- Indicator LEDs for each channel
- Dimensions: 120 x 90 x 20 mm
JOY-IT DEBO ROT SWITCH - Developer boards - coded rotary switch
12.53 EUR
"Coded rotary switch for different developer boardsWith this board the current position of the rotary switch can be given coded over the outputs.
The module can be soldered or used on a breadboard.
- Operating voltage: 5 V
- Dimensions: 31 x 13 x 18 mm
Extensive documentation at: http://anleitung.joy-it.net/?goods=sensor-kit-x40
Lock nut must be purchased separately as an accessory (e.g. P4 nut)"
JOY-IT DEBO LCD 20X4 BL - developer boards - display, 20 x 4 characters, blue
20.18 EUR
This display can be used for all popular developer boards, such as Raspberry Pi or Arduino.Specifications
• 20 x 4 characters (4 rows with 20 columns)
• HD44780 industry standard
• With soldered I2C communication adapter
• Just four I/O cables (power supply + 2x data cables) are therefore required for operation
• Adapter chip: PCF8574AT
• Both 3.3-V and 5-V logic level (5-V power supply)
• Backlight: blue
• Dimensions (L x W x H): 9.8 x 6 x 2 cm
SOLDERED DEBO I2C LCDDRV - Developer boards - Display adapter, I2C
17.29 EUR
"This adapter makes it easy to connect LCDs to an Arduino (or a compatible board such as Dasduino). It uses I2C communication and requires only two pins. Compatible with all LCD displays offered (16×2, 20×4, 16×4). Use of the Arduino library for quick commissioning of the LCD.- Simple connection via I2C
- Only two pins required
- compatible with 16×2, 20×4 and 16×4 LCD displays
- Supports Arduino and compatible boards
- quick commissioning with Arduino library
The adapter offers an efficient solution for integrating LCD displays into Arduino projects. By using the I2C interface, only two pins are occupied, which increases the availability of GPIO pins for other applications. The adapter is compatible with a wide range of LCD displays, including the popular 16×2, 20×4 and 16×4 formats. The Arduino library simplifies programming and enables quick and easy control of the LCD displays. The female header facilitates the connection and provides a stable and reliable interface between the LCD and the Arduino board.
Technical data
- I2C address: 0x20 (HEX)
- Voltage: 3.3 V
- Potentiometer for contrast
- for HDD44780 LCD driver
- easyC/Qwiic compatibility
easyC
easyC is a robust connection system that optimizes the connection of microcontrollers, sensors and actuators using JST-SH compatible connectors (JST 4-pin). It offers solderless connections, serial connections of multiple devices (daisy-chaining), error-free design, parallel connection, universal compatibility and intermediate compatibility with Qwiic (Sparkfun connection system), simplifying prototype development. Further information on easyC can be found under ""Data sheets"".
In summary, this adapter is a practical and flexible solution for efficiently integrating LCD displays into Arduino projects. Its easy installation and wide compatibility make it a valuable component for developers and engineers.
External links
https://github.com/SolderedElectronics/Soldered-16x2-LCD-Arduino-Library
https://github.com/SolderedElectronics/I2C-LCD-driver-board-hardware-design"